GE Multilin G650 Manual page 318

6 ACTUAL VALUES
SWITCH X OPEN
SWITCH X CLOSED
SWITCH X 00_ERROR
SWITCH X 11_ERROR
SWITCH X OPEN INIT
SWITCH X CLOSE INIT
SWGR X FAIL TO OPEN
SWGR X FAIL TO CLOSE
See attached figure
This screen can be accessed at Actual> Status > Calibration, and it includes the internal calibration status for the relay.
Table 6–26: CALIBRATION STATUS
GEK-113285A
Lights up when the associated switchgear is open
Lights up when the associated switchgear is closed
Output that represents the Switchgear status 00, considered as abnormal.
Output that represents the Switchgear status 11, considered as abnormal.
Programmable input that indicates the initiation of the Opening Operation for the considered
switchgear.
Programmable input that indicates the initiation of the closing Operation for the considered
switchgear.
Output that represents a failure to open, from the associated external device (opening time
exceeded)
Output that represents a failure to close from the associated external device (closing time
exceeded)
SWITCH X OPEN
INIT
SWITCH X CLOSE
INIT
SWITCH X A
INPUT
SWITCH X B
INPUT
Switchgear logic
module
Figure 6–1: SWITCHGEAR CONTACTS
CALIBRATION
FACTORY CALIBRATION
CALIBRATION ERROR
G650 Generator Protection & Control System
SWGR X FAIL TO OPEN
SWGR X FAIL TO CLOSE
SWITCH X A STATUS
SWITCH X B STATUS
SWITCH X OPEN
SWITCH X
CLOSED
SWITCH X
00_ERROR
SWITCH X
11_ERROR
6.2 STATUS
6
6.2.9 CALIBRATION
6-25