Product Setup; Communication Settings - GE Multilin G650 Manual

5 SETTINGS

5.2PRODUCT SETUP

5.2.1.1 SERIAL PORTS
Baud rate and parity for COM1 and COM2 serial communication ports.
Table 5–2: SERIAL PORTS SETTINGS
PRODUCT SETUP > COMMUNICATION SETTINGS >SERIAL PORTS
Name
COM1 Baud Rate
COM2 Baud Rate
COM1Parity
COM2Parity
5.2.1.2 NETWORK (ETHERNET)
Ethernet communication parameters for COM3. Two different Ethernet addresses can be used, but the first IP always has
to be set as the second IP Address is an Alias. The ModBus Slave address used by Ethernet ports is the one set for COM2.
Table 5–3: NETWORK SETTINGS
PRODUCT SETUP > COMMUNICATION SETTINGS >NETWORK (ETHERNET) NETWORK
(ETHERNET)1 > NETWORK (ETHERNET)2
Name
IP Address Oct1
IP Address Oct2
IP Address Oct3
IP Address Oct4
Netmask Oct1
Netmask Oct2
Netmask Oct3
Netmask Oct4
Gateway IP Oct1
Gateway IP Oct2
Gateway IP Oct3
Gateway IP Oct4
5.2.1.3 MODBUS PROTOCOL
ModBus Slave Addresses for serial and Ethernet communication and the ModBus port number used for ModBus TCP/IP.
For more detailed information go to appendix B in this manual.
Table 5–4: MODBUS PROTOCOL SETTINGS
PRODUCT SETUP > COMMUNICATION SETTINGS >MODBUS PROTOCOL
Name
ModBus Address COM1 254
ModBus Address COM2 254
ModBus Port Number
GEK-113285A
Default Value Step
19200 N/A
19200 N/A
NONE N/A
NONE N/A
Default Value Step
0 N/A
0 N/A
0 N/A
0 N/A
0 N/A
0 N/A
0 N/A
0 N/A
0 N/A
0 N/A
0 N/A
0 N/A
Default Value Step
1
1
502 1
G650 Generator Protection & Control System
5.2 PRODUCT SETUP

5.2.1 COMMUNICATION SETTINGS

Range
[300 : 115200]
[300: 115200]
[NONE:ODD:EVEN]
[NONE:ODD:EVEN]
Range
[0: 255]
[0: 255]
[0: 255]
[0: 255]
[0: 255]
[0: 255]
[0: 255]
[0: 255]
[0: 255]
[0: 255]
[0: 255]
[0: 255]
Range
[1 : 255]
[1 : 255]
[0 : 65535]
5
5-3