Text Menus - GE Multilin G650 Manual

4.2 HUMAN MACHINE INTERFACE (HMI)
4.2.5.1 NAVIGATION IN TEXT MENU
Text menu is available for all models, this is the main menu for visualizing actual values, metering, changing settings, etc.
through the HMI. In models with graphical display (M in ordering code) besides this text main menu there are several
screens providing more performance for control purposes.
Press (or rotate left or right) the shuttle key to enter the main menu, starting from the standby screen (default main screen).
The default main screen can be accessed pressing ESC key till it appears. In all the navigation press the shuttle key to
select the desired header display (top-level menu). Each press of the shuttle key advances through the main heading
pages as illustrated below. To return to previous menus press the ESC key. To move inside the top-level menu without
changing to other low levels, rotate the shuttle key left to move up and right to move down.
When rotating the shuttle key the selected menu is marked by a single scroll bar character. The mark (>) in the right part of
4
any menu means that contains more than one level.
Figure 4–17: Shows an example of main menu navigation:
G650 3.74 (4.10)
GENERAL ELECTRIC
G650MZDF2G1HIR
9200N81: MODBUS : 254
4-34
Symbol Action Performed
ENTER Press Shuttle Key
ESCAPE Press Esc Key
L-R Rotate Shuttle Key
L Rotate left Shuttle Key
R Rotate right Shuttle Key
Menu selection
> More menus to display
ENTER
ESCAPE
Figure 4–17: NAVIGATION IN MAIN TEXT MENU
G650 Generator Protection & Control System
4 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
Navigation in menu
Enter next level
Exit to previous level
Move up and down in the same level
Move up in the same level
Move down in the same level
Menu selection
More menus to display
Actual Values
Snapshot event
Fault report
View Settings
Change Settings
Date & Time
Commands
Passwords
Select Main Screen
Select Language
Return

4.2.5 TEXT MENUS

Front Panel
Status
ENTER
Metering
ESCAPE
Inputs/Outputs
Product Setup
System Setup
Protection Element>
Control Elements >
Logotype
Metering
All
Return
>
>
>
>
>
>
>
>
>
GEK-113285A