GE Multilin G650 Manual page 321

6.2 STATUS
6.2.12.2 CONTROL EVENTS
Actual> Status > Records Status > Control Events
In this screen Actual> Status > Records Status > Control Events, the status of the signals configured to launch the
control events can be seen, activated or not.
The G650 provides the possibility to configure 128 control events (at Settings>Relay Configuration > Control Events). In
the Actual > Records > Event Recorder > Control Events it is possible to see and retrieve the recorded control events to
a file, seeing the text and date and time and status of the preconfigured control event.
Table 6–29: CONTROL EVENTS STATUS
6.2.12.3 OSCILLOGRAPHY
Actual> Status > Records Status > Oscillography
The following figure shows the status of the different digital channels that can be programmed to be included in
oscillography records. When the signal associated to a specific channel is active, its LED will light up on this screen.
This screen shows as well the oscillography trigger status, active or inactive, by lighting up that channel.
Table 6–30: OSCILLOGRAPHY STATUS
6
The last three values shown are as follows:
NUMBER OF TRIGGERS: This is the number of the last oscillography record obtained in the relay. This value has a range
CYCLES PER RECORD:
AVAILABLE RECORDS:
Values for these last 3 fields are reset every time the oscillography settings are modified.
6-28
CONTROL EVENTS
CONTROL EVENT 1
CONTROL EVENT 2
...
CONTROL EVENT 128
OSCILLOGRAPHY
OSC DIG CHANNEL 1
OSC DIG CHANNEL 2
OSC DIG CHANNEL 3
OSC DIG CHANNEL 4
OSC DIG CHANNEL 5
OSC DIG CHANNEL 6
OSC DIG CHANNEL 7
OSC DIG CHANNEL 8
OSC DIG CHANNEL 9
OSC DIG CHANNEL 10
OSC DIG CHANNEL 11
OSC DIG CHANNEL 12
OSC DIG CHANNEL 13
OSC DIG CHANNEL 14
OSC DIG CHANNEL 15
OSC DIG CHANNEL 16
OSCILLO TRIGGER
NUMBER OF TRIGGERS
CYCLES PER RECORD
AVAILABLE RECORDS
of 0 to 999.
This is the number of cycles contained in the oscillography record; this value depends on the
settings adjusted on the oscillography menu at Setpoint > Product Setup > Oscillography.
This is the number of available oscillography records in the relay.
G650 Generator Protection & Control System
6 ACTUAL VALUES
GEK-113285A