GE Multilin G650 Manual page 282

5 SETTINGS
ACTIVE SYMBOLS
ICONS IN SCREEN
DATE AND TIME SYMBOL
OPERATIONS SYMBOL
GEK-113285A
DESCRIPTION
Symbol used for displaying in the HMI the date and time provided by the
device.
This symbol indicates the possibility to configure and execute operations on
the graphic display. This symbol can only be selected once the operations
have already been configured in the "Operations" screen of the "Relay
Configuration" menu. To select an Operation, click on the element and then
on the display. The program will show a window to select the required
operation among the displayed options, and the tab order. Once selected, a
red border square will be shown. Place this square on the object to be
operated. When the operated object is selected on the screen to execute this
operation, the object on which it is located will blink. It is possible to place
several operations on the same object, for example to open and close the
breaker object.
This symbol indicates the possibility to configure and execute operations with
the frontal keys "I" and "O" on the graphic display over an object selected. To
select the object, click on the element and then on the display. The program
will show a window to select the required operations "I" and "O" among the
displayed options, and the tab order. Once selected, a blue border square will
be shown. Place this square on the object to be operated. When the object is
selected on the screen to execute this operations, the object on which it is
located will blink, then press key "I" or "O" to execute the operations
configured.
G650 Generator Protection & Control System
5.8 RELAY CONFIGURATION
5-139
5