Commissioning With Starter; Overview - Siemens SINAMICS G120 Operating Instructions Manual

5.5

Commissioning with STARTER

5.5.1

Overview

Preconditions
You require the following to commission the converter using STARTER:
● A pre-installed drive (motor and converter)
● A computer with Windows XP, Vista or Windows 7, which is connected to the converter
Commissioning steps
Commissioning with STARTER is subdivided into the following steps:
1. Adapting the USB interface (Page 62)
2. Generating a STARTER project (Page 63)
3. Go online and perform the basic commissioning (Page 63)
4. Making additional settings (Page 67)
STARTER features a project Wizard that guides you step-by-step through the
commissioning process.
Note
The STARTER screens show general examples. You may therefore find that a screen
contains more or fewer setting options than are shown in these instructions. A
commissioning stage may also be shown using a Control Unit other than the one you are
using.
SINAMICS G120C Inverter
Operating Instructions, 01/2011, FW 4.4, A5E02999804A AB
via the USB cable and on which STARTER V4.2 or higher has been installed.
You can find updates for STARTER in the Internet under: Download STARTER
(http://support.automation.siemens.com/WW/view/en/10804985/133100)
Commissioning
5.5 Commissioning with STARTER
61