Setting Sto - Siemens SINAMICS G120 Operating Instructions Manual

8.10.7.4

Setting STO

● You can adapt the STO function according to your requirements in the following screen.
● Set the following in the above screen:
● Close the screen.
SINAMICS G120C Inverter
Operating Instructions, 01/2011, FW 4.4, A5E02999804A AB
– ① ② F-DI input filter (debounce time) and monitoring for simultaneous operation
(discrepancy):
The method of functioning of the two filters is described in the section entitled Signal
filtering (Page 231).
– ③ ④ Time interval for forced dormant error detection:
Information regarding forced dormant error detection can be found in the Forced
dormant error detection (Page 234) section.
8.10 Fail-safe function Safe Torque Off (STO)
Functions
237