Functions
8.9 Application-specific functions
Braking method depending on the application
Table 8- 28
Application examples
Pumps, fans, mixers, compressors, extruders
Grinding machines, conveyor belts
Centrifuges, vertical conveyors, hoisting gear, cranes, winders
8.9.2.2
DC braking
DC braking is used for applications without regenerative feedback into the line supply, where
the motor can be more quickly braked by impressing a DC current than along a braking
ramp.
Typical applications for DC braking include:
● Centrifuges
● Saws
● Grinding machines
● Conveyor belts
Whether DC braking or ramp-down with an OFF1 command is more effective depends on
the motor properties.
204
What braking method is suitable for what application?
Electrical braking methods
Not required
DC braking, compound braking
Dynamic braking
Operating Instructions, 01/2011, FW 4.4, A5E02999804A AB
SINAMICS G120C Inverter