Siemens SINAMICS G120 Operating Instructions Manual page 67

• In the next step, we
•
•
Switch on motor for motor data identification
Motor data identification for dangerous loads
Secure dangerous plant and system parts before starting the motor data identification, e.g.
by fencing off the dangerous location or lowering a suspended load to the floor.
SINAMICS G120C Inverter
Operating Instructions, 01/2011, FW 4.4, A5E02999804A AB
recommend the setting
"Calculate motor data only".
①
In the next step, set the
check mark for "RAM to ROM
(save data in drive)" in order
to save your data in the
converter so that it is not lost
when the power fails.
②
If you exit the wizard, the
converter outputs alarm
A07791. You must now
switch-on the motor to start
motor data identification.
CAUTION
Commissioning
5.5 Commissioning with STARTER
65