Configuring Communications To A Simatic Control - Siemens SINAMICS G120 Operating Instructions Manual

When you add the SIMATIC 300, a window is displayed in which you can define the network.
● Create a PROFIBUS DP network.
A.1.1.4

Configuring communications to a SIMATIC control

The inverter can be connected to a SIMATIC control in two ways:
1. Using the inverter GSD
2. Using the STEP 7 object manager
The following section describes how to configure the inverter using the GSD.
SINAMICS G120C Inverter
Operating Instructions, 01/2011, FW 4.4, A5E02999804A AB
Figure A-2 Inserting a SIMATIC 300 station with PROFIBUS DP network
This somewhat more user-friendly method is only available for S7 controls and installed
Drive ES Basic (see Section Commissioning tools (Page 22)).
Appendix
A.1 Application examples
293