Installing
4.4 Connecting the inverter
4.4.5
Terminal strips on the inverter
Figure 4-5
Terminal layout G120C
You can use the analog inputs AI0 and AI1 as additional digital inputs DI11 and DI12.
For a fail-safe input, use two "standard" digital inputs.
Terminals
16
17
Additional information on fail-safe inputs is available in the Permitted sensors (Page 228)
chapter.
40
Designation
Fail-safe input with Basic Safety
DI4
F-DI0
DI5
Operating Instructions, 01/2011, FW 4.4, A5E02999804A AB
SINAMICS G120C Inverter