Table 8: Forwarding Class Classification Based On Rule Type - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Table 8: Forwarding Class Classification Based on Rule Type

# Rule
1 default-fc
2 IP criteria:
• Multiple entries per policy
• Multiple criteria per entry
3 MAC criteria:
• Multiple entries per policy
• Multiple criteria per entry
The IP and MAC match criteria can be very basic or quite detailed. IP and MAC match criteria are
constructed from policy entries. An entry is identified by a unique, numerical entry ID. A single
entry cannot contain more than one match value for each match criteria. Each match entry has an
action which specifies the forwarding class of packets that match the entry.
The entries are evaluated in numerical order based on the entry ID from the lowest to highest ID
value. The first entry that matches all match criteria has its action performed.
list the supported IP and MAC match criteria.
7210 SAS-E OS Quality of Service Guide
Forwarding Class
Set the policy's default forwarding
class.
Set when an fc-name exists in the
entry's action. Otherwise, preserve
from the previous match.
Set when an fc-name exists in the
entry's action. Otherwise, preserve
from the previous match.
QoS Policies
Comments
All packets match the default rule.
When IP criteria is specified,
entries are matched based on
ascending order until first match
and then processing stops. A
packet can only match a single IP
criteria entry.
When MAC criteria is specified,
entries are matched based on
ascending order until first match
and then processing stops. A
packet can only match a single
MAC criteria entry.
Table 9
Page 37
and Table 10