Internal Peripheral Connectors; Fdd Connector; Table 3-3: Onboard Jumpers - IEI Technology WSB-9152 User Manual

Label Connector
JP1 LVDS Panel Voltage Select
JP2 Clear CMOS
JP3 FSB Select

Table 3-3: Onboard Jumpers

3.2

Internal Peripheral Connectors

Internal peripheral connectors are found on the CPU card and are only accessible when
the CPU card is outside of the chassis. This section has complete descriptions of all the
internal, peripheral connectors on the WSB-9152 CPU card.
3.2.1

FDD Connector

CN Label:
CN Type:
CN Location:
CN Pinouts:
The WSB-9152 is shipped with a 34-pin daisy-chain drive connector cable. This cable can
be connected to the FDD connector.
PIN DESCRIPTION
1 GND
3 GND
5 N/C
7 GND
9 GND
11 GND
13 GND
15 GND
17 GND
FDD1
2x17 pin header
See Figure 3-2
See Table 3-4
PIN DESCRIPTION
2 REDUCE WRITE
4 N/C
6 N/C
8 INDEX#
10 MOTOR ENABLE A#
12 DRIVE SELECT B#
14 DRIVE SELECT A#
16 MOTOR ENABLE B#
18 DIRECTION#
WSB-9152 CPU Card
Type
2-pin header
3-pin header
3-pin header
1-39 39