Onboard Jumpers; Table 3-25: Vga Connector Pinouts - IEI Technology WSB-9152 User Manual

WSB-9152 CPU Card
The standard 15-pin VGA connector connects to a CRT or LCD display monitor.
PIN DESCRIPTION
1 Red
2 Green
3 Blue
4 No Connect
5 Ground
6 Ground
7 Ground
8 Ground

Table 3-25: VGA Connector Pinouts

3.4

Onboard Jumpers

NOTE:
A jumper is a metal bridge that is used to
close an electrical circuit. It consists of
two metal pins and a small metal clip
(often protected by a plastic cover) that
slides over the pins to connect them. To
CLOSE/SHORT a jumper means
connecting the pins of the jumper with
the plastic clip and to OPEN a jumper
means removing the plastic clip from a
jumper.
68
1-68
PIN DESCRIPTION
9 No Connect
10 Ground
11 No Connect
12 DDC DAT
Horizontal
13
Synchronization
14 Vertical Synchronization
15 DDC Clock
Figure 1-3-22 Jumper
®
IEI Technology, Corp.