IEI Technology WSB-9152 User Manual page 89

The following user configurable options are also available in the BIOS Main Menu
Load Fail-Safe Defaults
This option allows you to load failsafe default values for each of the parameters on the
Setup menus. F6 key can be used for this operation on any page.
Load Optimized Defaults
This option allows you to load optimal default values for each of the parameters on the
Setup menus. F7 key can be used for this operation on any page.
Set Supervisor Password
By default no Supervisor Password is set. If you wish to install a supervisor password,
select this field and enter the password. After this option has been selected, a red
dialogue box with "Enter Password: " will appear. You will be asked to confirm your
password. Retype the original password into the "Confirm Password: " dialogue box and
press enter.
Change User Password
By default no User Password is set. If you wish to install a user password, select this field
and enter the password. After this option has been selected, A red dialogue box with
"Enter Password: " will appear. You will be asked to confirm your password. Retype the
original password into the "Confirm Password: " dialogue box and press enter.
Save & Exit Setup
If you have finished making the configuration changes and wish to save them and exit the
BIOS menus, select this option.
Exit Without Saving
If you have finished making configuration changes but do not want to save them and you
want to exit the BIOS menus, select this option.
WSB-9152 CPU Card
1-89 89