IEI Technology WSB-9152 User Manual page 134

WSB-9152 CPU Card
Enabled
x Date(of Month) Alarm [0]
The Date(of Month) Alarm option can only be configured if the Resume by Alarm option
has been enabled. When you select this option you will be asked to enter a number
between 0 and 31 to specify the date of the current month that you would like the system
to be roused.
x Time(hh:mm:ss) Alarm [0 : 0 : 0]
The Time(hh:mm:ss) Alarm option can only be configured if the Resume by Alarm
option has been enabled. You will have to set the time you wish the computer to be roused.
You will see three zeroes side by side. The first zero is for the hour, the second zero for
the minutes and the third zero for the seconds.
Hour (first zero): Select a number between 0 and 23
Minute (second zero): Select a number from 0 to 59
Second (third zero): Select a number from 0 to 59
Reload Global Timer Events
The Reload Global Timer Events field has the following BIOS configuration options
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ[A-D]
All the above options have "Disabled" as their default value. When disabled, if any activity
occurs on these devices during a suspended state, the system will not be roused.
If "Enabled" is selected for any of the above devices, and if activity is recorded on an
enabled device in the above list the system will be roused from its suspended state.
1-13
134
4
The date and time the computer must be roused
from a suspend state is specified
®
IEI Technology, Corp.