IEI Technology WSB-9152 User Manual page 123

Onboard FDC Controller [Enabled]
The Onboard FDC Controller allows you to select whether the onboard floppy controller
will or will not be used.
Disabled
Enabled (D
EFAULT
Onboard Serial Port 1 [3F8/IRQ4]
The Onboard Serial Port 1 option allows you to select the I/O address and IRQ for the
onboard serial port. The serial port can be disabled or the I/O address and the IRQ can be
automatically selected by the BIOS. The options are listed below:
Disabled
3F8/IRQ4 (D
EFAULT
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto
Onboard Serial Port 2 [3F8/IRQ4]
The Onboard Serial Port 2 option allows you to select the I/O address and IRQ for the
onboard serial port. The serial port can be disabled or the I/O address and the IRQ can be
automatically selected by the BIOS. The options are listed below:
Disabled
3F8/IRQ4
2F8/IRQ3 (D
EFAULT
3E8/IRQ4
2E8/IRQ3
Auto
WSB-9152 CPU Card
Disable this option if you use an adapter for your FDDs
or if you have no FDDs connected
) Select this option if FDDs are connected to the board
and will use the onboard FDD controller.
)
)
1-12
123
3