IEI Technology WSB-9152 User Manual page 98

WSB-9152 CPU Card
CPU L1 & L2 Cache [Enabled]
The CPU L1 & L2 Cache option allows users to select whether the CPU primary cache
(L1) and secondary cache (L2) will be turned on or off.
Enabled
Disabled
Quick Power On Self Test [Enabled]
The Quick Power On Self Test configuration option speeds up the POST after you turn
on the computer. If it is set to Enable, BIOS will shorten or skip some check items during
POST.
Enabled
Disabled
Boot Device
There are three Boot Device configuration options. They are:
First Boot Device [D
Second Boot Device [D
Third Boot Device [D
The Boot Device configuration options allow you to select the order of devices the
computer will boot from. Using the default values, the system will first look for a FDD to
boot from. If it cannot find an FDD it will use an HDD to boot from. If both a FDD and a
HDD are unavailable then the system will boot from a LS120 drive.
Boot Device configuration options are:
Floppy
LS120
Hard Disk
CDROM
ZIP100
98
1-98
(D ) The L1 and L2 CPU caches are both turned on
EFAULT
The L1 and L2 CPU caches are both turned off
(D ) Quick POST will occur after the computer is turned on
EFAULT
Normal POST will occur after the computer is turned on
: Floppy]
EFAULT
: Hard Disk]
EFAULT
: LS120]
EFAULT
®
IEI Technology, Corp.