IEI Technology WSB-9152 User Manual page 126

WSB-9152 CPU Card
EPP1.7
x ECP Mode Use DMA [3]
If the ECP mode is selected in the Parallel Port Mode configuration option, you will be
able to configure the ECP Mode Use DMA option. This option determines the DMA
channel the parallel port uses when it is in the ECP mode.
1
3
PWRON After PWR-Fail [Off]
This PWRON After PWR-Fail option allows you to select the state the system will return
to if there is a power failure or power to the system is suddenly cut off.
Off
On
Former-Sts
Game Port Address [201]
The Game Port Address configuration option allows you to specify the game port address.
Disabled
201
209
1-12
126
6
(D ) EPP 1.7 is selected as the EPP standard
EFAULT
Parallel port uses DMA Channel 1 in the ECP mode
(D ) Parallel port uses DMA Channel 3 in the ECP mode
EFAULT
(D ) After the power returns the system will remain off.
EFAULT
After the power returns, the system will turn on
After the power returns the system will return to its
original state. If it was off, it will remain off. If it was on,
it will turn on again.
When disabled, the onboard game port will be unable to
access any system resources and will in effect be
inaccessible.
(D ) The game board address is set to 201
EFAULT
The game board address is set to 209
®
IEI Technology, Corp.