IEI Technology WSB-9152 User Manual page 92

WSB-9152 CPU Card
CGA 40
CGA 80
MONO
Halt On
The Halt On category allows users to determine whether the computer will stop if an error
is detected during power up.
All Errors
No Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
Base Memory:
The Base Memory is NOT user configurable. The POST will determine the amount of
base (or conventional) memory is installed in the system. The value of the base memory is
typically 512K for systems with 512K memory installed on the CPU card or 640K for
systems with 640K or more memory installed on the motherboard.
92
1-92
The system will power up in 40 column mode
The system will power up in 80 column mode
A monochrome monitor is used. High-resolution
monochrome monitors are also supported.
(D ) Whenever BIOS detects a non-fatal error the
EFAULT
system will be stopped and you will be
prompted.
The system boot will not be stopped for any
errors that may be detected
The system boot will not stop for a keyboard
error; it will stop for all other errors.
The system boot will not stop for a disk error;
it will stop for all other errors.
The system boot will not stop for a keyboard
or a disk error; it will stop for all other errors.
®
IEI Technology, Corp.