Installation Considerations; Installation Notices - IEI Technology WSB-9152 User Manual

WSB-9152 CPU Card
4.1

Installation Considerations

NOTE:
The following installation notices and installation considerations should be
read and understood before the CPU card is installed. All installation
notices pertaining to the installation of the CPU card should be strictly
adhered to. Failing to adhere to these precautions may lead to severe
damage of the CPU card and injury to the person installing the CPU card.

4.1.1 Installation Notices

Before and during the installation of the WSB-9152 CPU card, please do the following:
Read the user manual
The user manual provides a complete description of the WSB-9152 CPU card,
installation instructions and configuration options.
Wear an electrostatic discharge cuff (ESD)
Electronic components are easily damaged by ESD. Wearing an ESD cuff will
remove ESD from your body and help to prevent ESD damage to the CPU
card.
Place the CPU Card on an antistatic pad
When you are installing or configuring the CPU Card, place it on an antistatic
pad. This will help to prevent potential ESD damage.
Turn off all power to the WSB-9152 CPU card
When working with the CPU card, make sure that it is disconnected from all
power supplies and that no electricity is being fed into the system.
Before and during the installation of the WSB-9152 CPU card DO NOT:
remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
74
1-74
®
IEI Technology, Corp.