Unpacking; Unpacking Precautions; Checklist - IEI Technology WSB-9152 User Manual

use the product before you have verified that all cables and power connectors
are properly connected.
allow screws to come in contact with the PCB circuit, connector pins, or its
components.
4.2

Unpacking

NOTE:
If any of the items listed below are missing when you unpack the
WSB-9152 CPU card, do not proceed with the installation and contact the
reseller or vendor you purchased the CPU card from.

4.2.1 Unpacking Precautions

Before you install the WSB-9152 CPU card, you must unpack the CPU card. Some
components on WSB-9152 are very sensitive to static electricity and can be damaged by a
sudden rush of power. To protect it from being damage, follow these precautions:
Ground yourself to remove any static charge before touching your WSB-9152 .
You can do so by wearing a grounded wrist strap at all times or by frequently
touching any conducting materials that is connected to the ground.
Handle your WSB-9152 by its edges. Do not touch the IC chips, leads or
circuitry if not necessary.
Do not place a PCB on top of an anti-static bag. Only the inside of the bag is safe from
static discharge.

4.2.2 Checklist

When you unpack the WSB-9152 , please make sure that your package contains the
following items.
1 x WSB-9152 single board computer
1 x mini jumper pack
1 x ATA 66/100 flat cable
WSB-9152 CPU Card
1-75 75