IEI Technology WSB-9152 User Manual page 94

WSB-9152 CPU Card
IDE Channel 0/1 Master/Slave [Auto]
The IDE Channel option allows you to activate or deactivate the following drive channels:
Channel 0 Master
Channel 0 Slave
Channel 1 Master
Channel 0 Slave
None
Auto
Manual
Access Mode [Auto]
The Access Mode option allows you to determine the hard disk BIOS translation modes.
Most systems now use hard drives with large capacities and therefore either the LBA
translation mode or auto should be selected.
CHS
LBA
Large
Auto
94
1-94
If you have no drives connected to the IDE channel
select this option. Once set, this IDE channel will
become inaccessible and any drives attached to it
undetected.
(D ) Setting this option allows the device to be automatically
EFAULT
detected by the BIOS
Selecting this option allows you to manually configure
the device on the IDE channel in BIOS.
Select this mode if the HDD capacity is less than
504MB.
Select this mode if the HDD capacity is more than
8.4GB.
This mode is an extended ECHS mode and while it
supports HDDs
recommended.
(D ) If you are unsure of what access mode to set, select this
EFAULT
larger than 504MB, it
®
IEI Technology, Corp.
is not