Peripheral Interface Connectors - IEI Technology WSB-9152 User Manual

3.1.2 Peripheral Interface Connectors

Table 3-1 lists the peripheral interface connectors on the WSB-9152 CPU card. Detailed
descriptions of these connectors can be found in Section 3.2 on page 39.
Label Connector
FDD1 FDD connector
IDE1 HDD connector
COM1 Serial communications connector
COM2 Serial communications connector
LPT1 Parallel port connector
SATA 1 SATA-I drive port (150MB/s) (see Table 1-1)
SATA 2 SATA-I drive port (150MB/s) (see Table 1-1)
SATA 3 SATA-II drive port (300MB/s) (see Table 1-1)
SATA 4 SATA-II drive port (300MB/s) (see Table 1-1)
LVDS1 Low Voltage Differential Signaling (LVDS)
connector (Vendor P/N: 33000-000929-RS)
CN1 LCD Backlight Inverter connector
CN100 ATX 12V connector
FAN2 CPU cooling fan connector
USB1 USB connector for 2 USB devices
USB2 USB connector for 2 USB devices
USB3 USB connector for 2 USB devices
CN9 Optional AC'97 Audio CODEC connector
DVI1 DVI connector (see Table 1-1)
J2 Infrared
WSB-9152 CPU Card
Type
34-pin header
40-pin header
5-pin header
5-pin header
26-pin header
SATA-I disk drive port
SATA-I disk drive port
SATA-II disk drive port
SATA-II disk drive port
30-pin header
5-pin header
4-pin header
3-pin header
8-pin header
8-pin header
8-pin header
10-pin header
26-pin header
5-pin header
1-37 37