Driver Installation - IEI Technology WSB-9152 User Manual

WSB-9152 CPU Card
The audio kit comes with a PCI slot bracket for the installation into a PC case or
rackmount chassis. Connect the 10-pin header to the PCIE-9450's AUDIO1 header as
shown in Figure E-1, and if necessary, connect the CDIN1 and AUXIN1 to optical drives or
other audio sources, e.g., an MPEG card, using a 4-pin cable. Note that depending on
the devices you connect to, the phone jacks have different functions with different audio
installation modes (2 channel or 5.1 channel modes).
D.3 Driver Installation
The driver installation has been described in Chapter 6, Section 6.4.
After reboot, you should be able to find the sound effect configuration utility in Windows
Control Panel (see Figure D-3); and if peripheral speakers have been properly connected,
hear the sound effects.
Figure D-3: Sound Effect Manager Icon
1-18
180
0
®
IEI Technology, Corp.