IEI Technology WSB-9152 User Manual page 102

WSB-9152 CPU Card
APIC Mode [Enabled]
The APIC Mode (Advanced Programmable Interrupt Controller mode) option is a BIOS
setting made available to Windows 2000 and Windows XP systems that increases the
number of IRQ (Interrupt Request) lines available to the processor from 16 to 23.
Enabled
Disabled
MPS Version Control for OS [1.4]
The Multiprocessor Specification (MPS) for OS specifies the MPS version to be used.
1.1
1.4
OS Select For DRAM > 64MB [Non-OS2]
The OS Select For DRAM > 64MB option allows you to specify the operating system you
are using.
Enabled
Disabled
Report No FDD For WIN 95 [No]
The Report No FDD For WIN 95 option allows you to release IRQ6 if you are using
Windows 95 or Windows 98 without a floppy disk.
No
Yes
1-10
102
2
IRQ lines increased from 16 to 23
(D ) Only 16 IRQ lines are available to the CPU
EFAULT
MPS version 1.1 is used
(D ) MPS version 1.4 is used
EFAULT
Only select this if you are using the OS/2 operating
system
(D ) If you are not using the OS/2 operating system then
EFAULT
disable this function.
(D ) Will not report that an FDD is not being used.
EFAULT
Will report that an FDD is not being used.
®
IEI Technology, Corp.