Dimm Module Installation; Purchasing The Memory Module; Figure 4-5: Connect The Cooling Fan Cable - IEI Technology WSB-9152 User Manual

on the CPU card. Carefully route the cable and avoid heat generating chips and
fan blades. (See Figure 4-5)

Figure 4-5: Connect the cooling fan cable

4.3.3 DIMM Module Installation

4.3.3.1 Purchasing the Memory Module

WARNING!
The DDR2 architecture is not compatible with DDR1 modules. If your
system is installed with DDR1 modules, damage might occur and you
will not be able to boot up your system.
When you purchase your DIMM modules, the following considerations should be taken
into account:
Each DIMM socket can support DIMM modules with a maximum size of 1GB
Only use DDR2 memory chips in the DIMM slots
It is recommended that you use memory modules of identical brand, size,
chips, and speed.
DIMMs must use the same density memory chips
Both DIMMs must use the same DRAM bus width
Both DIMMs must be either single-sided or dual-sided.
WSB-9152 CPU Card
Step 0:
1-81 81