wsm M6040 Workshop Manual page 571

M6040, M7040, WSM
Preparation 5
1. Disconnect the clutch cable (1).
2. Remove the shuttle select rod mounting nut (2) from shuttle
select rod (4) then disconnect the shuttle select rod (4).
3. Disconnect the shuttle cable (3).
(When reassembling)
• Be sure to adjust the clutch cable for the clutch pedal free travel.
(See page 2-S4.)
• Be sure to adjust the shuttle cable for the shuttle lever neutral
position. (See page 3-S6.)
(1) Clutch Cable
(2) Nut
10-S37
(3) Shuttle Cable
(4) Shuttle Select Rod
9Y1210143CAS0064US0
KiSC issued 07, 2012 A
CABIN