Front Axle Rocking Restrictor; Bonnet (Rops Model) - wsm M6040 Workshop Manual

M6040, M7040, WSM

(3) Front Axle Rocking Restrictor

(4) Bonnet (ROPS Model)

Front Axle Rocking Rectrictor
1. Install the front axle rocking restrictor (1) (see page G-64) to the
front axle bracket on both side.
(1) Front Axle Rocking Restrictor
Bonnet
1. Open the bonnet (1) and disconnect the battery negative
terminal.
2. Disconnect the connector (3) for head lights.
3. Disconnect the damper (4).
4. Remove the bonnet (1) and side cover (2) for both side.
IMPORTANT
• When disconnecting the battery cables, disconnect the
grounding cable first. When connecting, positive cable
first.
(1) Bonnet
(2) Side Cover
(3) Connector
3-S18
TRANSMISSION
9Y1210143TRS0023US0
(4) Damper
(5) Wire Harness (Head Light)
9Y1210143ENS0031US0
KiSC issued 07, 2012 A