Removing Differential Gear And Bevel Pinion Shaft - wsm M6040 Workshop Manual

M6040, M7040, WSM

(5) Removing Differential Gear and Bevel Pinion Shaft

Brake Cam Plate
1. Remove the return spring (1).
2. Remove the brake cam plate (2).
(When reassembling)
• Apply grease to the brake ball seats. (Do not apply excessively.)
• Be sure to assemble the brake cam plate (2) to the original side,
refer to the I.D. mark R and L.
(1) Return Spring
(2) Brake Cam Plate
(3) Ball
Differential Lock Fork
1. Remove the clevis pin (3) and plug (1).
2. Draw out the differential lock shaft (5).
3. Take out the differential lock shift fork (2) and spring (4).
(When reassembling)
• Apply grease to the oil seal.
(1) Plug
(2) Differential Lock Shift Fork
(3) Clevis Pin
(4) Spring
3-S45
TRANSMISSION
a: I.D. Mark
9Y1210143TRS0075US0
(5) Differential Lock Shaft
(6) Shim
(7) Oil Seal
9Y1210143TRS0076US0
KiSC issued 07, 2012 A