wsm M6040 Workshop Manual page 433

M6040, M7040, WSM
Disassembling Control Valve
1. Secure the control valve with a vise.
2. Remove the seat plug 1 (1) then take out the spring (2) and
poppet (3).
3. Remove the spring plate (6) and spring (7).
4. Remove the screw (5) and plate (4).
5. Draw out the spool (12).
6. Remove the sleeve (8) and spring (9).
7. Remove the seat plug 2 (11).
(When reassembling)
• Install the plug, noting O-ring.
Seat plug 1
Tightening torque
Seat plug 2
(1) Seat Plug 1
(2) Spring
(3) Poppet
(4) Plate
(5) Screw
(6) Spring Plate
8-S27
HYDRAULIC SYSTEM
39.2 to 58.8 N·m
4.0 to 6.0 kgf·m
28.9 to 43.4 lbf·ft
39.2 to 58.8 N·m
4.0 to 6.0 kgf·m
28.9 to 43.4 lbf·ft
(7) Spring
(8) Sleeve
(9) Spring
(10) Body
(11) Seat Plug 2
(12) Spool
9Y1210143HYS0031US0
KiSC issued 07, 2012 A