Disassembling 4Wd Clutch Pack - wsm M6040 Workshop Manual

M6040, M7040, WSM

(4) Disassembling 4WD Clutch Pack

4WD Hydraulic Pack
1. Remove the bearing (1) and thrust collar (2).
2. Remove the 32T gear (3).
3. Remove the external circlip (4).
4. Tap out the 4WD shaft (9).
5. Remove the neutral cover (5).
(When reassembling)
• Align the key (8) and key groove (10) when install the 4WD shaft
(9).
• Apply transmission fluid to the O-ring (6) and (11) when
assemble the neutral cover (6).
(1) Bearing
(2) Thrust Collar
(3) 32T Gear
(4) External Circlip
(5) Neutral Cover
(6) O-ring
3-S43
TRANSMISSION
(7) Clutch Body
(8) Key
(9) 4WD Shaft
(10) Key Groove
(11) O-ring
9Y1210143TRS0073US0
KiSC issued 07, 2012 A