Tightening Torques - wsm M6040 Workshop Manual

M6040, M7040, WSM

3. TIGHTENING TORQUES

Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts: Refer to "5. TIGHTENING TORQUES" on page G-13.)
Power steering delivery hose retaining nut
Controller pipe retaining nut
Oil cooler pipe retaining nut
Power steering controller mounting screw
Power steering pipe retaining nut
Power steering joint shaft mounting screw
Brake hose retaining nut
Power steering delivery hose
Tie-rod end slotted nut
Hose joint
Tie-rod joint
Gerotor assembly mounting screw (5/16')
Item N·m
22.6 to 27.5
49.0 to 68.6
49.0 to 68.6
48.1 to 55.8
49.0 to 68.6
23.5 to 27.4
22.6 to 27.5
22.6 to 27.5
77.5 to 90.2
29.4 to 34.3
166.7 to 196.1
25.5 to 28.4
7-S3
STEERING
kgf·m lbf·ft
2.3 to 2.8 16.6 to 20.3
5.0 to 7.0 36.2 to 50.6
5.0 to 7.0 36.2 to 50.6
4.9 to 5.7 35.5 to 41.2
5.0 to 7.0 36.2 to 50.6
2.4 to 2.8 17.4 to 20.3
2.7 to 2.8 16.6 to 20.3
2.3 to 2.8 16.6 to 20.3
7.9 to 9.2 57.1 to 66.5
3.0 to 3.5 21.7 to 25.3
17.0 to 20.0 123.0 to 144.7
2.6 to 2.9 18.8 to 21.0
9Y1210143STS0003US0
KiSC issued 07, 2012 A