wsm M6040 Workshop Manual page 227

M6040, M7040, WSM
[2] SOLENOID VALVE (PTO)
Thickness of Seal Ring
1. Measure the thickness of seal rings (1) with an outside
micrometer.
2. If the measurement is less than the allowable limit, replace it.
Factory specification
Thickness of seal ring
Allowable limit
(1) Seal Ring
Solenoid Valve (PTO)
1. Refer to "[10] SOLENOID VALVE" on page 9-S47.
(1) PTO Solenoid Valve
2-S11
CLUTCH
2.45 to 2.50 mm
0.096 to 0.098 in.
2.0 mm
0.079 in.
9Y1210143CLS0018US0
9Y1210143CLS0019US0
KiSC issued 07, 2012 A