Bonnet And Muffler Pipe (Cabin Model); Air Cleaner Harness Connector - wsm M6040 Workshop Manual

M6040, M7040, WSM

(5) Bonnet and Muffler Pipe (CABIN Model)

(6) Air Cleaner Harness Connector

Preparation 1
1. Open the bonnet (1) and disconnect the battery (2) negative
terminal and 6P connector (5) for head light.
2. Remove the bonnet dampers (4) and bonnet (1).
3. Remove the both side covers (3).
IMPORTANT
• When disconnecting the battery cables, disconnect the
grounding cable first. When connecting, positive cable
first.
(When reassembling)
• Connect the 6P connector (5) for head light within the space of
controller pipe (6), heater hose (7) and delivery hose (8) as
shown photo.
(1) Bonnet
(2) Battery
(3) Side Cover
(4) Damper
(5) 6P Connector (Head Light)
Muffler
1. Remove the muffler pipe (1).
(1) Muffler Pipe
Air Cleaner Harness
1. Disconnect the 1P connectors from the air cleaner switch (1).
2. Remove the air cleaner harness clamp.
(1) Air Cleaner Switch
3-S19
TRANSMISSION
(6) Controller Pipe
(7) Heater Hose
(8) Delivery Hose
(9) Air Cleaner Switch
9Y1210143TRS0025US0
9Y1210143TRS0026US0
9Y1210143TRS0027US0
KiSC issued 07, 2012 A