wsm M6040 Workshop Manual page 161

M6040, M7040, WSM
Brake Pipe
1. Remove the intake hose (3) and pipe (1).
2. Remove the brake pipe (2).
(1) Intake Pipe
(2) Brake Pipe
Separating Engine from Clutch Housing
1. Hoist the engine with a the hoist and chain.
2. Remove the steering support mounting screws (1) for front side.
3. Remove the engine mounting screws and nuts and separate the
engine from clutch housing.
(When reassembling)
• Apply molybdenum disulphide (Three Bond 1901 or equivalent)
to the splines of damper disc boss.
• Apply liquid gasket (Three Bond 1141, 1211 or equivalent) to
joint face of the engine and clutch housing.
Engine and clutch housing
Tightening torque mounting screw and nut
(M14, 7T)
(1) Steering Support Mounting Screw
1-S29
ENGINE
(3) Intake Hose
9Y1210143ENS0040US0
124 to 147 N·m
12.6 to 15.0 kgf·m
91.2 to 108 lbf·ft
9Y1210143ENS0041US0
KiSC issued 07, 2012 A