wsm M6040 Workshop Manual page 70

M6040, M7040, WSM
Auxiliary Socket for Fixing Crankshaft Sleeve
Application
• Use to fix the crankshaft sleeve of the diesel engine.
NOTE
• The following special tools are not provided, so make them referring to the figure.
A 1.5 mm (0.0591 in.)
B 0.523 rad (30 °)
C 34.925 to 34.950 mm dia. (1.3750 to 1.3760 in. dia.)
D 22 mm dia. (0.8661 in. dia.)
E 81.980 to 81.985 mm dia. (3.2276 to 3.2278 in. dia.)
F 6 mm (0.2362 in.)
G 23.5 mm (0.9252 in.)
H 29.5 mm (1.1614 in.)
I 58 mm (2.2835 in.)
J 95 mm (3.7402 in.)
K 98 mm dia. (3.8583 in. dia.)
L 0.523 rad (30 °)
M 82.1 to 82.2 mm dia. (3.2323 to 3.2362 in. dia.)
N 1.5 mm (0.0591 in.)
O 15 mm dia. (0.5906 in. dia.)
P 30 mm dia. (1.1811 in. dia.)
(1) Sleeve Guide (2) Auxiliary Socket for Pushing
Q 33 mm (1.2992 in.)
R 115 mm (4.5276 in.)
S 43 mm (1.6929 in.)
T 120 mm (4.7244 in.)
U 163 mm (6.4173 in.)
V 8 mm dia. (0.315 in. dia.)
W 33.475 to 33.525 mm (1.3180 to 1.3198 in.)
a Ra = 1.6 a
b 0.5 mm radius (0.0197 in. radius)
c Ra = 3.2 a
d 1.5 mm radius (0.0591 in. radius)
e 10 mm radius (0.3937 in. radius)
C1 Chamfer 1.0 mm (0.0394 in.)
C3 Chamfer 3.0 mm (0.1181 in.)
C5 Chamfer 5.0 mm (0.1969 in.)
G-49
GENERAL
9Y1210143GEG0080US0
KiSC issued 07, 2012 A