Control Lever Operating Force - wsm M6040 Workshop Manual

M6040, M7040, WSM

(4) Control Lever Operating Force

Position and Draft Control Lever Operating Force
1. Check the position and draft control lever operating force.
2. If measurement is not within the factory specification, adjust the
with tightening nuts (3).
Operating force for
position and draft control Factory specification
lever
(1) Position Control Lever
(2) Draft Control Lever
(3) Nut
8-S15
HYDRAULIC SYSTEM
20 to 40 N
2.0 to 4.1 kgf
4.5 to 9.0 lbf
[A] ROPS Model
[B] CABIN Model
9Y1210143HYS0013US0
KiSC issued 07, 2012 A