Separating Engine (Rops Model); Separating Front Axle And Front Frame As A Unit - wsm M6040 Workshop Manual

M6040, M7040, WSM

[3] SEPARATING ENGINE (ROPS MODEL)

(1) Separating Front Axle and Front Frame as a Unit

Front Axle Rocking Restrictor
1. Install the front axle rocking restrictor (1) (see page G-64) to the
front axle bracket.
(1) Front Axle Rocking Restrictor
Bonnet
1. Open the bonnet (1) and disconnect the battery negative
terminal.
2. Disconnect the connector (3) for head lights.
3. Disconnect the damper (4).
4. Remove the bonnet (1) and side cover (2) for both side.
IMPORTANT
• When disconnecting the battery cables, disconnect the
grounding cable first. When connecting, positive cable
first.
(1) Bonnet
(2) Side Cover
(3) Connector
Air Cleaner Harness
1. Disconnect the 1P connectors from the air cleaner switch (1).
2. Remove the air cleaner harness clamp.
(1) Air Cleaner Switch
1-S26
ENGINE
9Y1210143ENS0030US0
(4) Damper
(5) Wire Harness (Head Light)
9Y1210143ENS0031US0
9Y1210143ENS0032US0
KiSC issued 07, 2012 A