wsm M6040 Workshop Manual page 296

M6040, M7040, WSM
Differential Gear Assembly
1. Remove the differential bearing support (1), noting the number
of shims (2).
2. Take out the differential gear assembly (4) from transmission
case.
(When reassembling)
• Be sure to fix the O-rings (3).
• Align the oil passage "a" as shown photo.
• Be sure to adjust the turning torque of spiral bevel pinion shaft
(see page 3-S56).
• Be sure to adjust the backlash and tooth contact between the
spiral bevel gear and spiral bevel pinion shaft (see page 3-S57).
Differential bearing support
Tightening torque
mounting screw
(1) Differential Support
(2) Shim
(3) O-ring
(4) Differential Gear Assembly
3-S46
TRANSMISSION
48.1 to 55.8 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 lbf·ft
a: Oil Passage
9Y1210143TRS0077US0
KiSC issued 07, 2012 A