Using The Integral Modem; Entering Numbers In The Phone Directories - Paradyne 3163 User Manual

ACCULINK 3163 DSU/CSU

Using the Integral Modem

The DSU/CSU's integral modem enables your
DSU/CSU to communicate with remote devices to display
alarm messages or to function as the user interface.
The Call command, available from the Control branch
of the menu tree, provides the following functions to
initiate and terminate modem connections:
Pass – Initiates a call through the integral modem
to access a far-end DSU/CSU's front panel from
your DSU/CSU's front panel (or PC attached to the
COM port).
Dial – Initiates a call through the integral modem to
a printer, ASCII terminal, or PC. Sets up a
semipermanent connection to route alarm messages
to the specified destination.
Disconnect – Disconnects an active modem
connection.
Change Directory – Allows entry of phone
numbers into the internal phone directories.
For additional information, refer to the
Configuration Options section in Appendix C,
Configuration Options.

Entering Numbers in the Phone Directories

The DSU/CSU has five general directories
(1 through 5) and one alarm directory (A). Use the general
directories to store phone numbers for remote devices
such as standalone DSU/CSUs and ASCII printers. Use
the alarm directory to store the phone number of the
primary ASCII terminal or printer you use to display or
print alarms.
3-24
"
To enter or change numbers in the phone directories:
1. From the top-level menu screen, press the
2. Select Ctrl.
3. From the Control screen, select Call.
4. From the Call Setup screen, select ChDir.
User Interface
5. Press F1 (Next) to display the next directory (2, in
March 1999
Procedure
until the Ctrl selection appears on the screen.
Control:
Call Rel
F1 F2
Call Setup:
Pass Dial
F1 F2
The Directory 1 displays first, along with its
phone number if one has been entered.
this case). Press F2 (Previous) to display the
previous directory (A, in this case). Directories
appear in order, 1 through 5 and then A.
1: xxxxxxxxxxxxxxxxx
Next Prev
F1 F2
key
LED
F3
ChDir
F3
Edit
F3
3163-A2-GB20-10