Disconnecting The Modem Connection - Paradyne 3163 User Manual

4. From the Call Setup screen, select Dial. This
selection is not available if the DSU/CSU's
integral modem is already in use.
Call Setup:
Pass
F1
5. From the Dial Directory screen, press F1 (Up) to
display the next higher numbered directory or
press F2 (Down) to select the next lower
numbered directory.
Dial n : xxxxxxxxx
Up
F1
6. When the number of the desired directory appears
on the screen, press F3 (Dial) to place the call.
Dial n : xxxxxxxxx
Up
F1

Disconnecting the Modem Connection

The Disconnect command enables you to force a
disconnect of an active modem connection from the front
panel of the DSU/CSU. This command is only available
when the DSU/CSU modem is connected.
Disconnect methods include:
Using the Disconnect command via the front panel
menu (for all dial connections, or when a
pass-through connection is established to another
316x DSU/CSU).
Pressing and holding the
keys simultaneously (when a pass-through
connection is established to a remote device other
than a 316x DSU/CSU).
3163-A2-GB20-10
Dial ChDir
F2 F3
Down Dial
F2 F3
Down Dial
F3
F2
and front panel
"
Procedure
To disconnect an established modem connection using
the Disconnect command:
1. From the top-level menu screen, press the
until the Ctrl selection appears on the screen.
2. Select Ctrl.
3. From the Control screen, select Call.
4. From the Call Setup screen, select Disc.
The modem call is disconnected and the
Command Complete screen appears.
March 1999
Control:
Call Rel LED
F1 F2 F3
Call Setup:
Disc ChDir
F3
F1 F2
Disconnect:
Command Complete
F1 F2 F3
Operation
key
3-27