Mechanical Tests - Siemens SIPROTEC 7SD610 Manual

Line conducted HF, amplitude modulated
IEC 61000-4-6, Class III
Power system frequency magnetic field
IEC 60255-6
IEC 61000-4-8, Class IV
Oscillatory Surge Withstand Capability
IEEE Std C37.90.1
Fast Transient Surge Withstand Cap.
IEEE Std C37.90.1
Radiated Electromagnetic Interference
IEEE Std C37.90.2-2004
Damped oscillations IEC 60694, IEC 61000-4-12
EMC tests for noise emission (type test)
Standard:
Radio noise voltage to lines, only auxiliary voltage IEC-
CISPR 22
Interference field strength
IEC-CISPR 22
Harmonic currents on the network lead at 230 VAC IEC
61000-3-2
IEC 61000-3-2
Voltage fluctuations and flicker on the network incoming
feeder at 230 VAC
IEC 61000-3-3
1)
From production series /EE, limit class A to IEC-CISPR 11
4.1.6

Mechanical Tests

Vibration and Shock Resistance during Stationary Operation
Standards:
Oscillation
IEC 60255-21-1, Class 2
IEC 60068-2-6
Shock
IEC 60255-21-2, Class 1
IEC 60068-2-27
Seismic vibration
IEC 60255-21-3, Class 1
IEC 60068-3-3
SIPROTEC, 7SD610, Manual
C53000-G1176-C145-6, Release date 02.2011
10 V; 150 kHz to 80 MHz; 80 % AM; 1 kHz
0,5 mT; 50 Hz,
30 A/m continuous; 300 A/m for 3 s; 50 Hz
2,5 kV (peak); 1 MHz; τ = 15 µs; 400 Surges per s; test duration
2 s; R = 200 Ω
i
4 kV; 5 ns/50 ns; 5 kHz; burst lenght = 15 ms; repetition rate
300 ms; both polarities; R
35 V/m; 80 MHz to 1000 MHz; key ring test
2,5 kV (peak value), polarity alternating 100 kHz, 1 MHz,
R = 200 Ω
i
EN 61000-6-3 (generic standard)
150 kHz to 30 MHz
1)
Limit class B
30 MHz to 1000 MHz
1)
Limit class B
Class A limits are observed
Limits are observed
IEC 60255-21 and IEC 60068
Sinusoidal
10 Hz to 60 Hz: ± 0.075 mm amplitude;
60 Hz to 150 Hz: 1 g Acceleration
Frequency sweep 1 octave/min
20 cycles in 3 orthogonal axes
Semi-sinusoidal
5 g acceleration, duration 11 ms,
each 3 shocks (in both directions of the 3 axes)
Sinusoidal
1 Hz to 8 Hz: ± 3.5 mm amplitude (horizontal axis)
1 Hz to 8 Hz: ± 1.5 mm amplitude (vertical axis)
8 Hz to 35 Hz: 1 g acceleration (horizontal axis)
8 Hz to 35 Hz: 0.5 g acceleration (vertical axis)
Frequency sweep 1 octave/min
1 cycle in 3 orthogonal axes
Technical Data
= 50 Ω; test duration 1 min
i
4.1 General
331