Siemens SIPROTEC 7SD610 Manual page 335

FO6
Distance, maximum
Connector Type
Optical wavelength
Fibre Type
Transmit output (avg)
50 μm /125 μm, NA = 0.2
62.5 μm /125 μm, NA = 0.275
Receiver sensitivity (avg)
Optical budget
Laser class 1 according to EN 60825-1/-2
Reach
Attenuators required
1)
Numeric opening (NA = sin φ (coupling angle)
FO17
Distance, maximum
Connector Type
Protocol
Baudrate
Receiver interfacing
Optical wavelength
Fibre Type
Transmit output coupled in Monomodefaster
Receiver sensitivity
Optical budget
Laser Class 1 according to EN 60825–1/-2
Reach
Attenuators required
SIPROTEC, 7SD610, Manual
C53000-G1176-C145-6, Release date 02.2011
1)
1)
4.2 Protection Data Interfaces and differential protection topology
3.5 km or 2.2 miles
ST connector
λ = 820 nm
Multimode 62.5 μm/125 μm
Min. Type
-18.0 dBm -15.0 dBm
-17.0 dBm -12.0 dBm
min. -33 dBm
avg
min. 15.0 dB for 50 μm /125 μm, NA = 0.2
min. 16.0 B for 62,5 μm /125 μm, NA = 0.275
Using glass fibre 62.5 μm /125 μm and 50 μm /125 μm
for multimode optical fibre, an optical signal attenuation of 3
dB/km is used for calculating light with a wavelength of λ = 820
nm
no
24 km or 14,9 miles
LC duplex connector, SFF (IEC 61754–20 Standard)
full-duplex
155 MBits/s
AC
λ = 1300 nm
Monomode 9 µm/125 µm
min. -15.0 dBm
avg
max. -8.0 dBm
avg
min. -28.0 dBm
avg
max. -31.0 dBm
avg
13.0 dB
Using glass fibre 9 µm/125 µm
for multimode optical fibre, an optical signal attenuation of 0.3
dB/km is used for calculating light with a wavelength of λ = 1300
nm
no
Technical Data
1)
1)
335