Communication Interfaces - Siemens SIPROTEC 7SD610 Manual

Technical Data
4.1 General
4.1.4

Communication Interfaces

Protection data interfaces
See Section 4.2 „Protection Data Interfaces and Communication Topology"
Operator Interface
Connection
Operation
Transmission rate
Transmission distance
Service/Modem Interface (optional)
RS232/RS485
RS232
RS485
326
Front side, non-isolated, RS232,
9-pin D-subminiature female connector for connection of a PC
With DIGSI
Min. 4800 Baud; max. 115200 Baud;
Factory Setting: 38400 Baud; Parity: 8E1
15 m / 50 feet
RS232/RS485/FO
Acc. to ordered version
Operation
Connection for flush mounting housing
For Panel Surface-Mounted Case
Test Voltage
transmission rate
Maximum Distance of Transmission
Maximum Distance of Transmission
Isolatede interface
for data transfer
with DIGSI
RS232/RS485 according to ordered variant
Rear panel, mounting location „C",
9-pole D-subminiature female connector
Shielded data cable
Shielded data cable
at the terminal
at the case bottom
in console housing
at the case bottom;
9-pole D-subminiature female connector
500 V; 50 Hz
Min. 4800 Baud; max. 115200 Baud
Factory setting 38400 Baud
15 m (50 ft)
1,000 m (3280 ft)
SIPROTEC, 7SD610, Manual
C53000-G1176-C145-6, Release date 02.2011