Siemens SIPROTEC 7SD610 Manual page 327

System Interface (optional)
RS232/RS485/FO
Profibus DP RS485/
Profibus DP FO
DNP3.0/MODBUS RS485
DNP3.0/MODBUS FO
Ethernet EN100
Acc. to ordered variant
RS232
RS485
Fibre optic cable (FO)
Profibus DP RS485
SIPROTEC, 7SD610, Manual
C53000-G1176-C145-6, Release date 02.2011
Isolated interface for data transfer to a master terminal
Connection for flush mounting housing
For Panel Surface-Mounted Case
Test voltage
Transmission rate
Maximum Distance of Transmission
Connection for flush mounting housing
For Panel Surface-Mounted Case
Test voltage
Transmission rate
Bridgeable distance
FOC connector type
Connection for flush mounting housing
For Panel Surface-Mounted Case
Optical wavelength
Laser Class I according to EN 60825-1/-2 using glass fibre 50 μm/125 μm oder
Permissible path attenuation
Maximum Distance of Transmission
Character Idle State
Connection for flush mounting housing
For Panel Surface-Mounted Case
Test voltage
Transmission rate
Maximum Distance of Transmission
Rear panel, slot „B",
9-pole D-subminiature female connector
in console housing at case bottom
9-pole D-subminiature female connector
500 V; 50 Hz
Min. 4800 Baud; max. 38400 Baud
Factory setting 19200 Baud
Max. 15 m
Rear panel, slot „B",
9-pole D-subminiature female connector
in console housing at case bottom
9-pole D-subminiature female connector
500 V; 50 Hz
min. 4800 Baud; max. 38400 Baud;
Factory setting 19200 Bd
Max. 1 km
ST connector
rear panel, mounting location „B"
in console housing at case bottom
λ = 820 nm
using glass fibre 62,5 μm/125 μm
max. 8 dB, with glass fibre 62,5 μm/125 μm
Max. 1.5 km
Selectable, factory setting „Light off"
Rear panel, slot „B",
9-pole D-subminiature female connector
in console housing at case bottom
9-pole D-subminiature female connector
500 V; 50 Hz
up to 12 MBd
1,000 m (1640 ft.) at ≤ 93.75 kBd
500 m (1640 ft.) at ≤ 187.5 kBd
200 m (328 ft.) at ≤ 1.5 MBaud
100 m (328 ft.) at ≤ 12 MBaud
Technical Data
4.1 General
327