Siemens SIPROTEC 7SD610 Manual page 240

Functions
2.16 Function Control and Circuit Breaker Test
No. Information
13 >Annunc. 3
14 >Annunc. 4
15 >Test mode
16 >DataStop
51 Device OK
52 ProtActive
55 Reset Device
56 Initial Start
60 Reset LED
67 Resume
68 Clock SyncError
69 DayLightSavTime
70 Settings Calc.
71 Settings Check
72 Level-2 change
73 Local change
110 Event Lost
113 Flag Lost
125 Chatter ON
126 ProtON/OFF
140 Error Sum Alarm
144 Error 5V
160 Alarm Sum Event
177 Fail Battery
181 Error A/D-conv.
183 Error Board 1
184 Error Board 2
185 Error Board 3
186 Error Board 4
187 Error Board 5
188 Error Board 6
189 Error Board 7
190 Error Board 0
191 Error Offset
192 Error1A/5Awrong
193 Alarm adjustm.
194 Error neutralCT
320 Warn Mem. Data
321 Warn Mem. Para.
322 Warn Mem. Oper.
323 Warn Mem. New
2054 Emer. mode
240
Type of In-
formation
SP >User defined annunciation 3
SP >User defined annunciation 4
SP >Test mode
SP >Stop data transmission
OUT Device is Operational and Protecting
IntSP At Least 1 Protection Funct. is Active
OUT Reset Device
OUT Initial Start of Device
OUT_Ev Reset LED
OUT Resume
OUT Clock Synchronization Error
OUT Daylight Saving Time
OUT Setting calculation is running
OUT Settings Check
OUT Level-2 change
OUT Local setting change
OUT_Ev Event lost
OUT Flag Lost
OUT Chatter ON
IntSP Protection ON/OFF (via system port)
OUT Error with a summary alarm
OUT Error 5V
OUT Alarm Summary Event
OUT Failure: Battery empty
OUT Error: A/D converter
OUT Error Board 1
OUT Error Board 2
OUT Error Board 3
OUT Error Board 4
OUT Error Board 5
OUT Error Board 6
OUT Error Board 7
OUT Error Board 0
OUT Error: Offset
OUT Error:1A/5Ajumper different from setting
OUT Alarm: Analog input adjustment invalid
OUT Error: Neutral CT different from MLFB
OUT Warn: Limit of Memory Data exceeded
OUT Warn: Limit of Memory Parameter exceeded
OUT Warn: Limit of Memory Operation exceeded
OUT Warn: Limit of Memory New exceeded
OUT Emergency mode
Comments
SIPROTEC, 7SD610, Manual
C53000-G1176-C145-6, Release date 02.2011