Closing The Day; Automatic Sending Of Transactions; Sending Transactions Manually - Ingenico IWL220 User Manual

7.

CLOSING THE DAY

7.1

AUTOMATIC SENDING OF TRANSACTIONS

Daily transactions can be sent to the bank either automatically or manually. Automatic sending is performed at the time
programmed in the terminal. While automatic sending is in process no transaction can be performed!
At the end of the communication session the terminal shall issue the report that demonstrates the number of transactions and
the total sum.
TRANSAK. FAILS
Nr 1
Nosūtīšanas laiks: 01.01.2011 1:00
KOMPĀNIJA NOSAUKUMS
ADRESE
Termināls: HPC11111 Reģ.: 12345673 Kase: 101
Valūta: LVL (428)
Set "VISA"
Transakcijas 1
Atceltas 1 -3.19
Kopsumma 2
Transakcijas 1
Atceltas 1 -3.19
Kopsumma 2
Received 1 pcs, 0.00 units
Transakcijas nosūtītas OK
NB! IF THIS REPORT IS NOT PRINTED OUT, APPARENTLY THE TRANSACTIONS HAVE NOT REACHED
THE BANK!
Automatic sending is not performed where

No transactions were made after the last report has been sent

Sending was not successful, since the terminal was not plugged into the power network or the communication line used
by the terminal was not available.
Where automatic sending fails:

SEND TRANSACTIONS MANUALLY
NB! Where automatic sending fails, contact customer service of Nets Estonia.
7.2

SENDING TRANSACTIONS MANUALLY

The terminal is in the standby mode.
Press the leftmost button on the key bar
From the menu select "Reversal" (to navigate through the menu use ▼ ▲ key bar keys or
central keys on the key bar) and then press the green key (ENTER) to confirm.
If you wish to send transactions, press < Jā > or press the green key (ENTER).
3.19
0.00
3.19
0.00
ACTION
15
SCREEN
Laipni lūdzam!
Transakcijas
1- Nosūtīt
2- Atcelšana
3- Kartes trans
4- Kvīts kopija
Transakcijas
Pieteikt darīj.?
Pārliecināts?