ATSG FORD 4R100 Manual page 85

GROOVE
FACING UP
24 OVERDRIVE ROLLER OUTER RACE "FLAT" SNAP RING
25 OVERDRIVE ROLLER OUTER RACE
29 OVERDRIVE INTERNAL RING GEAR
Figure 141
Overdrive Gearset Assembly (Cont'd)
6. Install the flat snap ring into the groove in ring
gear, as shown in Figure 141, and ensure that
it is fully seated, as shown in Figure 142.
7. Install number 3 thrust washer onto back of the
overdrive planetary carrier and retain with a
small amount of Trans-Jel® (See Figure 143).
Continued on Page 86.
Technical Service Information
24
25
29
Copyright © 2003 ATSG
AUTOMATIC TRANSMISSION SERVICE GROUP
Ensure that snap ring is fully seated.
Figure 142
26 NUMBER 3 THRUST WASHER, OUTER RACE TO CARRIER
27 OVERDRIVE PLANETARY CARRIER ASSEMBLY
Figure 143
Copyright © 2003 ATSG
26
27
Copyright © 2003 ATSG
85