TRANSMISSION DISASSEMBLY
Internal Components (Cont'd)
26. Remove the reverse clutch hub and low roller
clutch assembly, as shown in Figure 70, and set
aside for component rebuild.
27. Remove the snap ring retaining the low/reverse
clutch pack, using a large screwdriver as shown
in Figure 71, from the groove in case.
28. Remove the snap ring from case, as shown in
Figure 72.
Continued on Page 52.
110 REVERSE CLUTCH HUB AND LOW ROLLER CLUTCH ASM.
Figure 70
Technical Service Information
110
Copyright © 2003 ATSG
AUTOMATIC TRANSMISSION SERVICE GROUP
SNAP
RING
Figure 71
Figure 72
LOW REVERSE CLUTCH
SNAP RING
Copyright © 2003 ATSG
51